|
Rear Body Mount Set +1mm Height
#301333
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Rear Body Mount Set +2mm Height
#301334
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Composite Rear 6mm Adjustable Body Mount Set
#301336
Rear body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
Lexan Rear Wing - Rank
#323513
Rear wing for XB2/XB4 made Lexan material is highly reliable with less chance of breakage, giving higher traction & stability but reducing steering.
|
|
|
Diff Bevel & Satellite Gears (2+4)
#335030
Differential gears for gear differentials are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. Includes 2 bevel and 4 satellite gears.
|
|
|
Diff Pin (2)
#335080
Polished steel pins for gear differential. Set of 2.
|
|
|
Alu Differential Pin - Hardcoated (2)
#335081
Alu hardcoated pins for NT1 gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2.
|
|
|
Alu Rear Wing Shim (2)
#353561
Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2.
|
|
|
XB4'20 Alu Chassis - Swiss 7075 T6 (2.5mm)
#361108
Unique chassis with shorter and longer wheelbase integrated in one chassis. There are two different mounting positions for center and rear diff assembly that allows to choose between a shorter and longer chassis alternative.
|
|
|
Alu C-Hub 12° Right
#362234
Aluminum RIGHT C-hub with pre-set 12° is CNC-machined from premium Swiss 7075 T6 aluminum. Additionally black coated and laser engraved.
|
|
|
Alu C-Hub 12° Left
#362244
Aluminum LEFT C-hub with pre-set 12° is CNC-machined from premium Swiss 7075 T6 aluminum. Additionally black coated and laser engraved.
|
|
|
Composite Steering Block - Graphite
#362250-G
Molded composite steering block from specially-formulated graphite composite material is a perfect balance between reliability and performance.
|
|
|
Anti-Roll Bar 1.0mm
#362470
Spring steel anti-roll bar, 1.0mm thick. Marked with no laser-engraved lines for easy identification. Black colour.
|
|
|
Anti-Roll Bar 1.1mm
#362471
Spring steel anti-roll bar, 1.1mm thick. Marked with 1 laser-engraved line for easy identification. Black colour.
|
|
|
Anti-Roll Bar 1.2mm
#362472
Spring steel anti-roll bar, 1.2mm thick. Marked with 2 laser-engraved lines for easy identification. Black colour.
|
|
|
Anti-Roll Bar 1.3mm
#362473
Spring steel anti-roll bar, 1.3mm thick. Marked with 3 laser-engraved lines for easy identification. Black colour.
|
|
|
Anti-Roll Bar 1.4mm
#362474
Spring steel anti-roll bar, 1.4mm thick. Marked with 4 laser-engraved lines for easy identification. Black colour.
|
|
|
Anti-Roll Bar 1.6mm
#362476
Spring steel anti-roll bar, 1.6mm thick. Marked with 6 laser-engraved lines for easy identification. Black colour.
|
|
|
Composite Servo Saver - Graphite
#362510-G
Molded composite servo saver parts made from specially-formulated graphite composite mixture for increased strength, improved friction and lower weight. Perfect balance between reliability and performance.
|
|
|
Composite Steering Plate - Graphite
#362571-G
Molded composite steering plate made from specially-formulated graphite composite mixture for increased strength and lower weight.
|
|
|
Steering Brace 2.0mm - Graphite
#362581
CNC-machined steering brace plate made from 2.0mm premium-grade graphite material. Increases steering and improves landings from jumps, but makes the car less stable.
|
|
|
Alu Lower Suspens. Holder 1° Rear-Front - Narrow - 7075 T6
#363315
Alu lower suspension holder 1° toe-in for the FRONT of the rear suspension. Redesigned to move the inner pivot location closer to the vehicle center allowing to use longer and shorter suspension arm alternatives and new suspension geometry.
|
|
|
Lexan Rear Wing 1.5mm (2)
#363511
Optional rear wing for XB4 & XB4 2WD. The 1.5mm thick material is highly reliable with less chance of breakage, while at the same time influencing the performance of the car as well.
|
|
|
Lexan Rear Wing - Extra Thick (2)
#363512
Optional rear wing for XB4 & XB4 2WD. The extra thick material is highly reliable with less chance of breakage, while at the same time influencing the performance of the car as well.
|
|
|
Alu Central Bulkhead - Low
#364024
Direct aluminum replacement of the lower composite central bulkhead for better reinforcement, greater reliability, and longer life.
|
|
|
XB4 Multi-Adjustable Slipper Clutch (MSC) - Set
#364100
Unique Multi-Adjustable Slipper Clutch â€✠MSC, with independently adjustable FRONT and/or REAR slippage via different slipper pads and clutch plates of different diameter, ensures more efficient and more consistent clutch operation to generate faster acceleration and less wheel spin.
|
|
|
Composite 3-Pad Slipper Clutch Spur Gear 75T / 48
#365875
Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 75T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.
|
|
|
Composite 3-Pad Slipper Clutch Spur Gear 78T / 48
#365878
Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 78T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.
|
|
|
Composite 3-Pad Slipper Clutch Spur Gear 81T / 48
#365881
Precision-molded spur gear 81T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle high performance brushless motors.
|
|
|
Composite 3-Pad Slipper Clutch Spur Gear 84T / 48
#365884
Precision-molded spur gear 84T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle high performance brushless motors.
|
|
|
Composite 3-Pad Slipper Clutch Spur Gear 87T / 48
#365887
Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 87T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.
|
|
|
Independent Servo Mount - Set
#366220
The independent servo mount that allows the steering servo to be mounted to the chassis without touching it which ensures that unwanted chassis tweak is eliminated and overall traction is increased.
|
|
|
Alu Shock Spring Retaining Collar (4)
#368021
Set of lower aluminum shock collars for increased reliability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color.
|
|
|
Alu Shock Cap-Nut With Vent Hole (2)
#368051
Machined aluminum upper shock cap for XB4 shock absorbers. Optional alu upper shock cap offer an increased durability and extended life time.
|
|
|
Front Spring Set - 1 Dot (2)
#368183
The springs have been specifically designed to complement the big bore shocks. The spring rate is constant during the entire spring compression.
|
|
ID |
Product Name |
Released |
361108 |
|
Nov. 21, 2019 |
361280 |
|
Sep. 30, 2019 |
363242 |
|
Sep. 30, 2019 |
363315 |
|
Sep. 30, 2019 |
364113 |
|
Sep. 30, 2019 |
364172 |
|
Sep. 30, 2019 |
364182 |
|
Sep. 30, 2019 |
364912-G |
|
Sep. 30, 2019 |
364920-G |
|
Sep. 30, 2019 |
322112-G |
|
Jun. 11, 2019 |
368191 |
|
Jun. 10, 2019 |
368195 |
|
Jun. 10, 2019 |
323515 |
|
Mar. 05, 2019 |
323517 |
|
Mar. 01, 2019 |
368192 |
|
Feb. 26, 2019 |
368193 |
|
Feb. 26, 2019 |
368194 |
|
Feb. 26, 2019 |
368292 |
|
Feb. 26, 2019 |
368293 |
|
Feb. 26, 2019 |
368294 |
|
Feb. 26, 2019 |
| |
|
|