|
Antenna (2)
#306310
Antenna tube to fit antenna mount. Set of two.
|
|
|
XB8'21 Alu Chassis - Swiss 7075 T6 (3mm)
#351116
The XB8'21 chassis features a locking system for the servo saver posts that ensures the components will stay secured even during chassis flex in extreme conditions.
|
|
|
XB8 Chassis Side Guards L+R
#351159
All-new redesigned side guards incorporate a larger bottom radius to make the car more stable on rough tracks, and increase the car???s longitudinal flex.
|
|
|
Body Posts
#351301
Strong composite body post set includes one of each front & rear body posts.
|
|
|
XB8 Composite Front Brace
#352084
Front brace made from tough molded composite, shorter for increased flex and generating more traction.
|
|
|
XB8 Composite Front Lower Suspension Arm - Medium
#352120-M
MEDIUM-hardness front LOWER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability.
|
|
|
XB8 Composite Front Upper Arm - Medium
#352133-M
MEDIUM-hardness front UPPER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability.
|
|
|
XB8 PB Composite Steering Block
#352244
Front pivot ball steering block molded from specially formulated composite material. Fits larger outside ball-bearings for increased reliability and life-span.
|
|
|
XB8 Composite Caster Clips (2)
#352381
Molded clips for adjusting position of front upper arm. Includes 2mm and 2x 1mm thick clips. Set of 2. Fits XB8.
|
|
|
Composite Rear Brace - Medium - M
#353082
All-new rear brace is shorter and the mounting position on the chassis has been relocated for a new chassis flex point position.
|
|
|
Alu Rear Low. Susp. Holders Set - Square Adj. Roll-C.
#353304
Authentic XRAY set of alu rear lower suspension holders, CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
|
|
|
XB8 Composite Rear Upright LB
#353354
The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span.
|
|
|
Composite Rear Wing - IFMAR - Black
#353513-K
The stylish and effective rear wing was designed to provide the appropriate amount of downforce and generate required stability for the car
|
|
|
XB8 Composite Rear Wing Holder
#353524
Fully redesigned rear wing holder increases stability on high-speed tracks and has a super-slim, 1-piece design for reduced weight and increased strength.
|
|
|
Composite Rear Wing Shim - Black (2)
#353565
Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2.
|
|
|
Composite Wing Holder Brace with Rear Body Post
#353580
To help prevent rear gear box breakage during crash impacts, the rear wing construction was completely reconstructed and now features an all-new wing holder brace that transfers crash impact energy from the wing and shock tower to the chassis where it is centrally resolved.
|
|
|
Center Diff Mounting Plate Set - Higher
#354011
Redesigned composite center diff mounting plate set is slightly taller to allow use of 47T or 48T spur gears on center diff without need for additional shims. Two complete sets are required for mounting the center diff.
|
|
|
Brake Disk - Hardened - V2
#354110
Heat-treated and hardened brake disk with super-flat surfaces for highly-effective braking and vibration-free operation.
|
|
|
Steel Brake Pad Laser Cut - Hardened (4)
#354121
High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness.
|
|
|
Glued Brake Pad Set - Ultra-Efficient (4)
#354131
Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency.
|
|
|
XB8 Rear Differential 46T - V2 - Set
#355005
Complete REAR differential set for XB8with larger diff gears for increased traction. Perfect play between gears and larger oil volume prevents the diff from overheating, extending its lifespan.
|
|
|
Central Differential - Large - Set
#355013
Complete CENTER differential set with larger diff gears for increased traction. Perfect play between gears and larger oil volume prevents the diff from overheating, extending its lifespan.
|
|
|
Differential Case - V2
#355022
Rubber-sealed differential housings made from tough composite give perfect fit and no vibration.
|
|
|
Center Differential Case - V2
#355023
Large volume rubber-sealed differential housings made from tough composite give perfect fit and no vibration.
|
|
|
Center Diff. Pin (2)
#355082
Precision-ground polished steel pin 3.5 x 33 mm. for internal satellite gears used in large center differential #355013. Set of 2
|
|
|
F/R Diff. Pin (2)
#355084
Precision-ground polished steel pin 3.5 x 27 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. Set of 2.
|
|
|
Bevel Drive Gear 14T
#355114
14-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine. Fits XB8.
|
|
|
CVD Drive Axle - Hudy Spring Steel
#355211
CVD drive axle made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength.
|
|
|
CVD Universal Drive Shaft - Hudy Spring Steel
#355221
CNC-machined CVD universal drive shaft front/rear suspension made from world-renown HUDY Spring Steel. Strategically-machined, the lightweight drive shaft has been weight-reduced without compromising strength. Hand ground for maximum precision, then individually measured and inspected. The most unique no-compromise off-road drive shafts.
|
|
|
CVD Universal Drive Shaft 93mm - HUDY Spring Steel
#355223
CNC-machined CVD universal drive shaft 93mm, made from world-renowned HUDY Spring Steel help to reduce the chances of bind in the outdrives after extreme jump landings that could cause handling irregularities or damage.
|
|
|
Alu Wheel Axle Offset +1mm - Hard Coated
#355251
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.
|
|
|
Alu Wheel Axle Offset +2mm - Hard Coated
#355252
Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear.
|
|
|
Central CVD Shaft Universal Joint - HUDY Spring Steel
#355416
Central CVD shaft universal joint made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength. Fits front & rear central CVD drive shafts.
|
|
|
Composite Radio Case Set
#356003
All-new radio plate design incorporates a new compact composite radio box. Batteries are now located at the front for better balance. Clean and smooth 1-piece plate design.
|
|
|
XB8 Brake/Throttle System - Set
#356402
Brake/throttle set includes threaded steel rods, pivot joints, ball joints, adjusting collars, and all necessary hardware. Fits XB8.
|
|
|
Steel Pivot Ball 13.7mm (2)
#357250
13.7mm steel pivot ball, ultra-precision hand ground for high durability and long life. Set of 2. Fits XB8.
|
|
|
Alu Adjusting Nut M15x1 (2)
#357252
Alu M15 adjusting nut for capturing pivot balls in front steering blocks or rear uprights. Set of 2. Fits XB8.
|
|
|
Rear Lower Outer Pivot Pin Screw 3mm (2)
#357331
Hardened 3mm rear lower outer hinge pins are mounted through the rear uprights and locked with self-locking nuts. This concept ensures that suspension pins will never come out during racing and moreover it ensures that the play between the arms and uprights will not change. The upright holder concept reinforces the holding of the upright and prevents the pin or upright from becoming disconnected in crashes.
|
|
|
Composite Shock Parts
#358020
Set of composite molded parts for 2 shock absorbers, includes spring lower collar and ball joints.
|
|
|
Folding Shock Boot (4)
#358074
Soft rubber folding shock boots keep dirt and debris off the shock rod and out of the shock body.
|
|
|
Alu Shock Body Nut for Shock Boot (2)
#358142
Black hardcoated aluminum shock body nut. Entire lower shock assembly is secured with the new lower aluminum shock cap for quick & easy assembly/disassembly.
|
|
|
Alu Shock Body Adj. Nut (2)
#358150
CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2.
|
|
|
XB8 Front Shock Shaft 61mm (2)
#358165
Thick, robust 3.5mm front shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.
|
|
|
XB8 Rear Shock Shaft 67.5mm (2)
#358264
Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.
|
|
|
XRAY Front Spring 69mm - 4 Dots (2)
#358316
New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.
|
|
|
Clutch Bell 13T
#358513
13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine.
|
|
|
Flywheel Collar
#358540
Tapered collar for mounting flywheel to engine crankshaft.
|
|
|
Alu Clutch Shoe - Hard (3)
#358564
Aluminum clutch shoes. Harder material allows for faster clutch engagement and higher corner speed. Set of 3.
|
|
|
Fuel Tank 123cc with Floating Filter
#358605
Extra-strong fuel tank with integrated floating stone filter ensures that the fuel pickup will always be in the correct orientation even when the car isnâ™t.
|
|
|
Fuel Tank Cap Rubber Seal
#358645
Rubber 1-piece profiled seal for perfect fitment and sealing of #338601 and #358603 fuel tank.
|
|
|
Exhaust Wire Mount Set - Long
#358722
Exhaust wire mounting set for XT8 includes mounting wire and post, composite support, and all necessary hardware.
|
|
|
Air Filter Set - Low Profile
#358801
Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil.
|
|
|
Air Filter Elbow - Low Profile
#358811
Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil.
|
|
|
Composite Tubing Holder for Fuel Tank (2)
#358941
Molded composite fuel tubing holders for fuel tank are attached to the tank by screws. These holders prevent the fuel tubes from moving around during racing and help prevent the fuel tube from contacting the flywheel.
|
|
|
XRAY Sticker For Body - White
#397311
Set of black&white transparent stickers for your body. Fits any body and can be used for tool box as well. Available in several colors.
|
|
|
Hex Screw SH M3x18 - Left Thread (10)
#902319
Unique custom-made left-thread screws specially developed and designed for use on off-road and truggy arms (for the lower shock mounts) to prevent the screws from turning out due to vibration. To be used only on LEFT REAR arm and RIGHT FRONT arm.
|
|
|
Pin 2.5x11.5 (10)
#980261
Polished chrome pin. dia. x length = 2.5mm x 11.5mm - new pins for large XB8 differentials #355004, #355005, and #355013. Set of 10.
|
|
|
Pin 2.5x13 (10)
#980263
Polished chrome pin. Dia. x length = 2.5mm x 13mm. Set of 10 pieces.
|
|
|
Pin 3x14 (10)
#980314
Polished chrome pin. Dia. x length = 3mm x 14mm. Set of 10.
|
|
|
Pin 3x17 (10)
#980317
Polished chrome pin. Dia. x length = 3mm x 17mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
358264 |
|
Mar. 05, 2018 |
357254-G |
|
Feb. 15, 2018 |
941318 |
|
Jan. 11, 2018 |
353053 |
|
Nov. 23, 2017 |
353082 |
|
Nov. 23, 2017 |
353524 |
|
Nov. 23, 2017 |
353580 |
|
Nov. 23, 2017 |
908318 |
|
Nov. 23, 2017 |
971061 |
|
Nov. 23, 2017 |
355058 |
|
May 26, 2017 |
352659 |
|
Feb. 21, 2017 |
352514 |
|
Jan. 12, 2017 |
354073 |
|
Jan. 12, 2017 |
355005 |
|
Jan. 12, 2017 |
355013 |
|
Jan. 12, 2017 |
355022 |
|
Jan. 12, 2017 |
355023 |
|
Jan. 12, 2017 |
355031 |
|
Jan. 12, 2017 |
355065 |
|
Jan. 12, 2017 |
355072 |
|
Jan. 12, 2017 |
| |
|
|