xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Composite C-Hub Suspension Option Set, Complete F+R
#300900

Composite C-hub suspension set, complete for front and rear. Modeled after the XRAY's superb aluminum C-hub suspension (#300901), the components of this set are molded from a tough composite material for lighter weight, without sacrificing quality or rigidity.
 



Alu C-Hub Suspension Option Set, Complete F+R
#300901

Freedom of choice!
XRAY raises the T1's level of perfection even higher by introducing a new optional C-hub suspension.  



Alu C-Hub Suspension Option Set, Front
#300921

This superb new optional C-hub suspension gives a slightly softer ride, and is a great way to set up your T1 for different racing conditions.  



Alu C-Hub Suspension Option Set, Rear
#300931

This superb new optional C-hub suspension gives a slightly softer ride, and is a great way to set up your T1 for different racing conditions.  



6-Cell Chassis - Graphite
#301110

New CNC-machined graphite 6-cell chassis with the batteries either on the left side or right side. This chassis layout enables you to either use the various placements almost as on the standard chassis, but also to place all 6 cells along the left or right side.  



eXtra Rigid Chassis (XRC) - Graphite 3.5mm
#301111

Use the ultimate chassis that top Team XRAY drivers Josh Cyrul, Ralph Burch, Jr. and Alex Lopez used to win their US National titles. Turn your T1 into the most ultimate racing machine. 



Upper Deck - Wide
#301163

Wide upper deck is made of high-quality CNC-machined graphite. Wider and stiffer than stock upper decks on T1 Evo2 and T1 Factory Kit.  



Ultra Flexible Top Deck
#301170

This option part makes the top deck and whole car very stiff in the axis direction of transmission and stiff at any serious crash, but makes the chassis with suspension flex when needed. By letting the chassis twist, the car can get more grip without making the suspension any softer (and increasing body roll). The car is more calm and is not so aggressive therefore it has feeling it is more easy to drive. 



Flexible Top Deck - Graphite
#301180

The new 301180 Flexible Top Deck provides another tuning option to adjust the chassis stiffness of your XRAY T1. Made of CNC-machined top quality graphite, this flexible top deck provides medium stiffness, stiffer than the 301170 Ultra Flexible Top Deck, but softer than the standard stock top deck. 



Impact Absorbing Front Bumper
#301201

Impact Absorbing Front Bumper for T1. The bumper is made from high quality nylon that absorbs the energy from crashes.
 



Precut Foam Bumper For Transponder
#301221

Precut foam bumper is great option if you race at races requiring transponder. The bumper from special foam absorbs all energy from a crash and has a special seeting to fit the transponder. 



Foam Bumper - Blue
#301225

High quality foam bumper, blue color, made from specially developed foam material. Very light yet very strong. Protects front of car in serious collisions.  

Replaced by Foam Bumper 



Alu Susp. Adjust. Bulkheads - Factory Kit (4)
#302001

Complete set of four “Euro-style” alu bulkheads, standard in XRAY T1 Factory Kit. Includes four eccentric nylon hubs and plastic covers for ball-bearings.  

Replaced by Foam Bumper 



Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041

Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.  



Alu Eccentric Front Upper Pivot Pin Holders (4)
#302065

For steering setting and fine tuning
High-quality CNC machined aluminum arm holders are a great add-on for your T1 to help you fine tune your steering. Exchange the standard nylon holder for these alu holders and adjust the steering very precisely - exactly how you will need and require. These eccentric holders will greatly help you to tune and improve the steering characteristic.  



Shock Tower Front for Foam Tires - Graphite
#302095

CNC-machined front shock tower made from highest-quality 2.5mm woven graphite. This shock tower is lower than the original, and is designed for use with the optional C-hub suspension and smaller diameter tires with foams. 



Shock Tower Front - Factory Kit
#302096

CNC-machined high-quality graphite front shock tower. Features new shock positions for better suspension adjustment, and new front roll center positions. 



C-hub Complete Tuning Set
#302100

Complete tuning set of all composite C-hub suspension parts is a great addition for serious racers to exactly tune the car to any track condition.  



Short Suspension Arm - Front Lower - C-Hub
#302159

Molded short front lower suspension arm for C-hub suspension. May be used on either left or right side. 

Replaced by Short Suspension Arm - Front Lower - C-Hub - Hard 



Short Suspension Arm - Front Lower - C-Hub - Hard
#302160

Molded short front lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification.  



Ackermann Extension Plate (2)
#302205

Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware. 



Composite Steering Block Right – 3 Holes
#302251

Right C-hub steering block made from tough molded composite. Includes 3 holes for choice of Ackermann setting. 



Composite Steering Block Left – 3 Holes
#302261

Left C-hub steering block made from tough molded composite. Includes 3 holes for choice of Ackermann setting.
 



Alu C-Hub for Steering Block Right - Caster 1.5°
#302272

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 1.5 degrees. Engraved with "R1.5" for easy identification.  



Alu C-Hub for Steering Block Left - Caster 1.5°
#302273

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 1.5 degrees. Engraved with "L1.5" for easy identification.  



Alu C-Hub For Steering Block - Caster 0°
#302275

CNC-machined highest-quality duraluminum C-hub with caster pre-set at 0 degrees for maximum off-power steering. Can be used for either left or right steering blocks; use only a matched pair of 0deg C-hubs together. 



Alu C-Hub For Steering Block Right - Caster 3°
#302276

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 3 degrees for more on-power steering. Engraved with "R3" to easy identification. 



Alu C-Hub For Steering Block Left - Caster 3°
#302277

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 3 degrees for more on-power steering. Engraved with "L3" to easy identification. 



Alu C-Hub For Steering Block Right - Caster 6°
#302278

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 6 degrees for maximum on-power steering. Engraved with "R6" to easy identification.  



Alu C-Hub For Steering Block Left - Caster 6°
#302279

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 6 egrees for maximum on-power steering. Engraved with "L6" to easy identification.  



Composite C-Hub Front Block, Right - Soft - 3°
#302281

Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Soft rigidity. Use with left-side composite 3° C-hub (soft) #302283. 



Composite C-Hub Front Block, Left - Soft - 3°
#302283

Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Soft rigidity. Use with right-side composite 3° C-hub (soft) #302281. 



Composite C-Hub Front Block, Right - Soft - 6°
#302285

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Soft rigidity. Use with left-side composite 6° C-hub (soft) #302287. 



Composite C-Hub Front Block, Right - Medium - 6°
#302286

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Medium rigidity. Use with left-side composite 6° C-hub (medium) #302288. 

Replaced by Composite C-Hub Front Block, Right - Hard - 6° 



Composite C-Hub Front Block, Left - Soft - 6°
#302287

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Soft rigidity. Use with right-side composite 6° C-hub (soft) #302285. 



Composite C-Hub Front Block, Left - Medium - 6°
#302288

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286. 



Composite C-Hub Front Block, Right - Hard - 3°
#302325

Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Hard rigidity. Use with left-side composite 3° C-hub (hard) #302326. 



Composite C-Hub Front Block, Left - Hard - 3°
#302326

Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Hard rigidity. Use with right-side composite 3° C-hub (hard) #302325. 



Composite C-Hub Front Block, Right - Medium - 4.5°
#302327

Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Medium rigidity. Use with left-side composite 4.5° C-hub (medium) #302328. 



Composite C-Hub Front Block, Left - Medium - 4.5°
#302328

Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Medium rigidity. Use with right-side composite 4.5° C-hub (medium) #302327. 



Composite C-Hub Front Block, Right - Hard - 4.5°
#302329

Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Hard rigidity. Use with left-side composite 4.5° C-hub (hard) #302330. 



Composite C-Hub Front Block, Left - Hard - 4.5°
#302330

Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Hard rigidity. Use with right-side composite 4.5° C-hub (hard) #302329. 



Composite C-Hub Front Block, Right - Hard - 6°
#302331

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Hard rigidity. Use with left-side composite 6° C-hub (hard) #302332. 



Composite C-Hub Front Block, Left - Hard - 6°
#302332

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Hard rigidity. Use with right-side composite 6° C-hub (hard) #302331. 



Anti-roll Bar Set Front Adjustable
#302400

Optional adjustable front anti-roll bar for XRAY T1. If you are racing on a high traction surface and your car tends to oversteer, use this optional anti-roll bar kit. This will decrease the front chassis roll and decrease steering throughout the corner. This will give your car more rear traction. 



Anti-Roll Bar Front 2mm (Set)
#302460

If your car is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering.
This complete front anti-roll bar set is designed for use with the composite front upper bumper holder (#301217) which has molded-in mounts. The kit includes a 2.0mm anti-roll bar. 



Anti-Roll Bar Front 1 mm
#302471

Optional front anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment of the front anti-roll bar. This is the SOFTEST front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set. 



Anti-Roll Bar Front 1.5 mm
#302472

Optional front anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the front anti-roll bar. This is the MEDIUM front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set. 



Dual-Ackerman Central Servo Saver
#302501

This new servo-saver assembly, pre-assembled, has two positions at which to mount the steering arm pivots. Mounting the pivots in these different holes provides different steering Ackerman effects. Great for adjust steering sensitivity.  



Roll Center Alu Holder - Set (2)
#303031

This set is used to relocate the inner mounting points for the rear camber links. Used with #303093 rear shocktower to utilize shorter camber links with short arm suspension, and also allows changes to rear roll center. Set includes alu pivot ball posts and mounting hardware. 



Belt Tensioner Set
#303070

Optional belt tensioner. 



Ultra-Tune Shock Tower Rear - 2.5mm Graphite
#303091

CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Numerous positioning holes for upper shock mounting as well as upper camber link mounting. These strategically-placed positioning holes provide ultimate tunability of your car's rear suspension to suit any track condition. 



Shock Tower Rear - Factory Kit
#303093

CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Optimized positioning holes for upper shock mounting as well as upper camber link mounting.  



Set of Alu Shim (0.5mm, 1.5mm, 2.5mm)
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Short Suspension Arm - Rear Lower - C-Hub
#303159

Molded rear short lower suspension arm for C-hub suspension. May be used on either left or right side. 



Short Suspension Arm - Rear Lower - C-Hub - Hard
#303160

Molded rear short lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification. 



Anti-Roll Bar Rear 2mm (Set)
#303400

If your car is understeering, then try this optional rear anti-roll bar. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction. This will give your car more steering. 



Anti-roll Bar Rear 1mm
#303421

Optional rear anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment possibilities of the rear anti-roll bar. This is the SOFTEST rear anti-roll bar.  



Anti-roll Bar Rear 1.5mm
#303422

Optional rear anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the rear anti-roll bar. This is the MEDIUM rear anti-roll bar.  



Ball Differential - Spring Steel - Set
#305001

XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!  



One-Way Differential PRO - Set
#305101

Front One-Way Differential PRO for XRAY T1 or T1 EVO2. Front axle PRO machined from lightweight alloy, strategically machined for the lightest possible weight without compromising strength. 



XRAY Multi-Diff T1, T1EVO2, T1R, T1M, T1FK
#305103

New, innovation and new patent – the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.  



Multi-Diff Main Axle T1, T1EVO2, T1R, T1M, T1FK
#305113

CNC-machined main axle for Multi-Diff™ for XRAY T1, T1Evo2, T1R, T1M, and T1FK.
This axle does NOT fit the Multi-Diff™ for XRAY T1FK’05.
 



Multi-Diff Locking Axle - Spring Steel
#305121

Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters. 



Inner Driveshaft Adapter - Spring Steel (2)
#305131

Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.  

Replaced by Inner Driveshaft Adapter 3.5mm - Spring Steel (2) 



Delrin® Solid Axle Complete Set
#305181

Delrin® Solid Axle Complete Set is for serious racers looking for an edge. XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle complete set is a full-time solid axle only; all parts are included. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 



Delrin® Solid Axle Body - Lightweight
#305186

For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 



Wheel Axle – 22mm - Offset “-1mm” - Hard Coated (2)
#305312

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures “slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.  



Wheel Axle – 22mm - Offset “+1mm” - Hard Coated (2)
#305313

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures “slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.  



Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315

Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.  



High-Performance Drive Belt Front 3x507mm
#305431

Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."  



High-Performance Drive Belt Rear 3x180mm
#305442

Specially modified high-performance 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency. This belt is very thin and elastic as possible for an extremely effective transmission that saves batteries and eliminates friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.

To fully enjoy the benefits from these high-performance belts, be sure all the transmission's ball-bearings are absolutely clean and there is no undue drag or friction. 



Solid Alu Central Layshaft Set
#305502

Solid central layshaft set for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential. 



Low Ratio Pulley Set (ratio 1.77)
#305550

New high-performance option set of low ratio pulleys. The set includes 32T front and rear differential pulleys and Labyrinth Dust Covers (TM), 32T pulley for front one-way, and 18T central layshaft pulleys.  



One-Way Pulley With Grooved One-Way Bearing
#305582

New one-way bearing for the middle shaft. This bearing has grooves on its outer surface that will prevent any potential rotational slippage inside the nylon pulley. 



Composite Offset Spur Gear 72T / 48
#305772

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 76T / 48
#305776

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 79T / 48
#305779

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 



Composite Spur Gear H 84T / 48 - Orange
#305784-O

XRAY precision molded spur gear 84 tooth, 48 pitch. 



Composite Offset Spur Gear 90T / 64
#305860

XRAY precision molded offset spur gear 90 tooth, 64 pitch 



Composite Offset Spur Gear 92T / 64
#305862

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64
#305866

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64 - Orange
#305866-O

XRAY precision molded offset spur gear 96 tooth, 64 pitch. 



Composite Offset Spur Gear 99T / 64
#305869

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64
#305870

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64 - Orange
#305870-O

XRAY precision molded offset spur gear 100 tooth, 64 pitch. 



Composite Offset Spur Gear 110T / 64 - Orange
#305880-O

XRAY precision molded offset spur gear 110 tooth, 64 pitch. 



Alu Narrow Pinion Gear - Hard Coated 39T / 64
#305989

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 40T/64
#305990

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 42T/64
#305992

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Alu Narrow Pinion Gear - Hard Coated 43T / 64
#305993

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 44T/64
#305994

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 46T/64
#305996

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 



Alu Narrow Pinion Gear - Hard Coated 47T / 64
#305997

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 48T/64
#305998

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 50T/64
#306000

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Battery Mount Strap For 6-Cell Chassis
#306160

Battery mount strap designed for use with 301110 6-cell chassis. Same great design as original T1 battery mount straps, but longer to hold down 6 instead of 3 cells. Made from graphite - smart design, easy to install, easy and fast to use.  



Stickpack Mounting Brackets
#306170

A great add-on for the chassis will enable you to use the battery stick packs on this race car as well. Made from graphite - smart design, easy to install, easy and fast to use. 



Alu Pivot Ball 8.4 mm - Hard Coated (4)
#307251

Front 8.4mm pivot balls, CNC-machined from strong, lightweight duraluminum and hardcoated for long life and durability. Set of four. 



Alu Pivot Ball 6.8 mm - Hard Coated (4)
#307351

Rear lower 6.8mm pivot balls, CNC-machined from strong, lightweight duraluminum and hardcoated for long life and durability. Set of four. 



Pivot Ball 4.9mm Double Bevel Shoulders (10)
#307453

Specially-machined 4.9mm pivot ball with double bevel shoulders. Set of 10 pieces. 



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Adjustable + Non-Adjustable Shock Pistons
#308034

These new nylon pistons are a professional solution for the adjustable XRAY (XRAY & Serpent) shocks. Conversion set contains parts to upgrade all 4 shocks: 4 keyed shockrods (2 front, 2 rear) + 4 new adjustable pistons + 4 sets of 3 different non-adjustable pistons (with 2,3,4 holes) + all required assembly hardware. 



Shock Absorber Membranes - Low
#308081

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 



Shock Foam Inserts (4)
#308090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces. 



Shock Foam Insert - Low (4)
#308091

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment. 



Composite Shock Parts - Rebound Hole - Short
#308332

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 



Ball-Bearing 10x15x4 Rubber Sealed - Oil (12)
#309055

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  



Tires XXT-M W/O Belt for Low Grip Asphalt (2)
#309612

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  



Tires XXT-M for Asphalt (2)
#309617

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 



Body Alfa 156 Ver. 2.0 + Accessories (Protoform)
#309710

Alfa 156 (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Body Stratus 2.0 + Accessories (Protoform)
#309720

Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Balancing Chassis Weights (Front - 2pcs.)
#309820

Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass. 

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



Balancing Chassis Weights (Rear - 6 pcs.)
#309830

Precision chassis weights
A complete set of 6 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the rear of the chassis but fits any other race car as well. Made from brass. 

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



Balancing Chassis Weights (Center - 3 pcs)
#309850

Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.  

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Ceramic Ball 2.4mm (12)
#930220

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 



Ball-Bearing 10x15x4 Rubber Sealed - Grease (2)
#941014

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  



ID Product Name Released
305784-O Composite Spur Gear H 84T / 48 - Orange May 27, 2019
305866-O Composite Offset Spur Gear 96T / 64 - Orange May 27, 2019
305870-O Composite Offset Spur Gear 100T / 64 - Orange May 27, 2019
305880-O Composite Offset Spur Gear 110T / 64 - Orange May 27, 2019
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
941014 Ball-Bearing 10x15x4 Rubber Sealed - Grease (2) Mar. 21, 2018
305869 Composite Offset Spur Gear 99T / 64 Nov. 14, 2017
305772 Composite Offset Spur Gear 72T / 48 Apr. 11, 2017
305776 Composite Offset Spur Gear 76T / 48 Apr. 11, 2017
305779 Composite Offset Spur Gear 79T / 48 Apr. 11, 2017
303126-K Alu Shim 3x6x5.0mm - Black (10) Mar. 24, 2017
305860 Composite Offset Spur Gear 90T / 64 Jan. 03, 2017
305989 Alu Narrow Pinion Gear - Hard Coated 39T / 64 Oct. 21, 2016
305993 Alu Narrow Pinion Gear - Hard Coated 43T / 64 Oct. 21, 2016
305997 Alu Narrow Pinion Gear - Hard Coated 47T / 64 Oct. 20, 2016
308031-K Alu XRAY Shock Spring Retaining Collar - Black (4) Apr. 06, 2016
303125 Alu Shim 3x6x3.0mm (10) Oct. 24, 2014
303125-K Alu Shim 3x6x3.0mm - Black (10) Oct. 24, 2014
309710 Body Alfa 156 Ver. 2.0 + Accessories (Protoform) Sep. 04, 2014
309720 Body Stratus 2.0 + Accessories (Protoform) Sep. 04, 2014