XT9

XRAY XT9 All-new Specs:

All-new chassis

All-new side guards

All-new 1-piece radio plate

All-new system of rear chassis braces mounting

All-new rear chassis brace

All-new rear wing

All-new center drive shafts mounting system

All-new center drive shafts

All-new central CVD shaft universal joints

All-new center drive shafts locking rings

All-new center drive shafts rubber boots

All-new I.S.S. aluminum suspension holders

All-new composite suspension eccentric bushings

All-new lower inner pivot pins

All-new alu wheel axles

All-new graphite upper plate

All-new low profile air filter

New rear body post

New double rear braces

General

Developed, designed and styled by Dipl. Eng. Juraj Hudy, manufactured exclusively by XRAY in Europe in the world's most sophisticated RC manufacturing facility

Revolutionary off-road platform with new benchmark for premium quality, reliability and performance

Premium, professional, high-competition model racing car for the most demanding racers

Manufactured from premium European materials, machined using state of the art Swiss and German machines

Premium XRAY service & support

Chassis

CNC-machined 3mm Swiss 7075 T6 chassis

Strategically machined in low-stress areas and anodized for light weight and uncompromised strength and rigidity

Redesigned chassis with updated weight distribution for improved balance and stability

Countersunk underside screw holes for a flat, smooth chassis bottom

Updated side guard design offers improved side protection, seals better against dirt, protects the fuel tank,

Radio plate is a compact, balanced, 1-piece electronics assembly that can be quickly & easily removed for servicing and cleaning

Extra large 150cc fuel tank with molded-in splashguard uses rubber grommets to absorb vibration

Robust, high-durability diff bulkheads allow super-easy diff access

Well-proven composite front & rear chassis braces have a significant influence on chassis stiffness and chassis flex

Engine & Clutch

High-grade CNC-machined aluminum engine mounts machined from lightweight alloy are easily adjustable to obtain proper gear mesh

Extended engine mount design provides higher reinforcement of the chassis to minimize chassis bending between the clutchbell and spur gear

2-part, smooth-flowing and efficient air filter includes air filter oil and a universal rubber elbow to fit most standard 1/8 buggy engines

Clutch system provides smooth and continuous transfer of power from engine at very high RPM; includes alu 1.7g lightweight clutch shoes, 1.0mm springs, aluminum flywheel and a steel flywheel nut

Clutch nut and preload adjustment collar manufactured from special HUDY Spring Steel™ for maximum lifespan and durability

Wide range of clutchbells available in sizes of 12T-15T

Brakes

Well-proven, high-performance braking system

Aluminum brake 7075 T6 hub with precision-pressed pins

Laser-cut, precision flat-ground steel brake disk for ultra-efficient fade-free braking

High-grip Ferodo™ brake pads

Brake disk and brake pads heat treated for maximum lifespan

Drivetrain

Front & rear gear differential with adjustable oil viscosity featuring 43T crown gear and 10T pinion gear

Central differential with adjustable oil viscosity featuring 48T spur gear with standard 13T clutchbell on the engine

Front, central, and rear CVD drive shafts

Diff outdrives manufactured from exclusive HUDY Spring Steel™ are specially hand-ground for maximum precision and smooth operation

CVD drive shafts manufactured from world-renowned HUDY Spring Steel™ are some of the world‘s thinnest yet most durable drive shafts used in off-road kits

Central larger and stronger outdrives feature protective rubber boots, thick 3mm pins, and a protective locking ring

All drive shafts and outdrives are hardened with a proprietary hardening process to provide unbeatable lifetime and reliability.

Ultra-lightweight 17mm wheel hex drive hubs +2.00mm are CNC-machined from Swiss 7075 T6 black-coated aluminum, specially machined to reduce rotating weight while guaranteeing wobble-free wheel mounting.

Complete set of 24 high-speed, blue-sealed ball-bearings, degreased, lightly oiled for maximum efficiency, individually controlled, selected, and inspected

Gear Differentials

Rubber-sealed composite differential housings feature steel inserts that are manually precision ground after the molding process to guarantee a perfect fit with no vibration

Differential internal gears are made from pressed steel, heat treated, and machined for ultra-precise and smooth operation

Differential main gears are manufactured from HUDY Gear Steel, specially formulated and developed for use in gears.

All gears are hardened to provide the longest possible lifespan

Spur gears available in 46T, 47T and 48T

Crown gears available in 41T and 43T

Suspension

Advanced suspension geometry engineered and finely tuned for high-competition racing

Every suspension part has been specially designed for 1/8 truggy racing platform to provide responsive racing characteristics in all racing conditions

Lightweight yet durable suspension parts molded from XRAY's own composite mixture for suspension parts

Super-long suspension arms provide maximum stability and optimal stiffness to ensure maximum traction, superior handling under all racing conditions and terrains

Front & rear CNC-machined extra-thick graphite shock towers include multiple shock mounting position and roll center adjustment position

Fully-adjustable suspension featuring I.S.S. (Integrated Suspension Settings™) with eccentric bushings inserted into Swiss 7075 T6 alu holders

Complete set of I.S.S. eccentric bushings is included for complete suspension geometry adjustment.

Unique C-hub suspension with Integrated Adjustable CasterTM which enables adjustment of the single C-block through the entire caster angle range; no optional caster blocks needed!

C-blocks feature an inclined kingpin design for increased steering and stability

Small, super-lightweight composite zero kingpin steering blocks feature an inset aluminum bushing that is molded into the steering block itself, ensuring a lightweight, precise and durable steering block assembly.

Steering block kingpin screws are firmly held in the aluminum threaded bushing while the end of the screw is self-locked in composite to prevent the screws from loosening during racing. The molded-in aluminum bushings allow the steering blocks to turn freely ensuring precise steering reaction.

Compact, lightweight rear uprights with multiple upper & lower roll center positions, and wheelbase adjustment possibilities

Optional track-width adjusting hex drives with, 0mm, +1.00mm, and +5.00mm offsets are available

Front & rear wire-style anti-roll bars manufactured from spring steel material are included to stabilize the chassis at both front and rear

Diff case mounts for anti-roll bars allow for easy installation and adjustment

Premium Hudy Spring Steel™ adjustable turnbuckles

Steering

Robust dual-arm steering system is very simple yet effective and features an integrated easily adjustable servo saver

Easily-adjustable Ackermann using different steering link mounting positions on the steering plate

Easily-adjustable bump steer using inserted shims

Shocks

XRAY big-bore, long-stroke shocks offer increased downtravel, reliability, performance, and improved damping characteristics

Hardcoated shock bodies

Reinforced ball joints

Shock body large inner diameter ensures proper and consistent shock oil flow through the perfectly-round pistons which move very precisely inside the smoothly-finished interior of the shock body

Ultra-fine protective shock rubbers give superior sealing

Externally-threaded shock bodies for quick & easy adjustment

Improved lower shock assembly for freer shock rod movement while minimizing oil leakage and offering improved sealing against dirt.

Ultra-precise shock pistons with 6-, 8- and 10-hole designs

Thick, robust shock shafts designed for maximum strength & durability are precision-ground and super-smooth for free and smooth movement

Wider shock membranes made from improved material to guarantee the same damping characteristics throughout a race

XRAY self-developed and manufactured ultimate racing springs are hand-selected for maximum precision, equal length, and equal damping characteristics

Body & Wing

Strong front & rear composite body mounts with foam cushions

Stylish and effective rear wing made from special composition was designed for proper downforce and stability, and will remain intact and properly shaped even after hard abuse and extreme crashes

Strong rear wing holders offer different wing mounting positions

Low-profile racing Lexan™ truggy body perfectly fits the XT9

Wheels & Tires

XRAY Racing Dish Wheels are molded from light yet very durable material and are well suited for high-competition racing.

XRAY Thrax low-profile truggy tires ensure high traction and high speed while the large sidewalls are designed for more controllable and consistent side bite

Tires are made from soft compound to generate sufficient grip in most racing conditions

Foam inserts are included

Lubricants

XRAY Premium Silicone Oils are manufactured in Europe by a specialized premium silicone oil manufacturer, and use the industry-standard cSt rating

Silicone Oils were exclusively created for XRAY, with each batch of premium oil being laboratory tested and calibrated to ensure the highest possible consistency and quality between batches

Premium HUDY Graphite Grease is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying

Graphite Grease is intended primarily for the lubrication of rotating parts and loaded gears, and it is formulated to have excellent adhesion and fling resistance under extreme conditions

Assembly, Set-up & Support

Premium 3D full-color Instruction Manual & supplementary sheets

To fully understand the set-up possibilities we recommend the legendary HUDY Set-up Book (available for download exclusively at www.hudy.net) which is loaded with over 50 pages of high-quality pictures and easy-to-read RC car set-up explanations

Exclusive Virtual Online Setup Sheet database with thousands of set-up sheets for race tracks around the world

Premium, unmatched XRAY online support

Adjustment Possibilities:

Fully-adjustable front and rear suspension geometry: caster, camber, toe, kick-up, anti-squat, ride height, downstops, track-width, anti-roll bars, lower roll center, upper roll center, roll center positions, bump steer, wheelbase, Ackermann, shock damping, shock mounting position.

Front/center/rear differential adjustment

For easy and fast adjustment we recommend using set-up tools and accessories from HUDY, the world leader of RC tools.