xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
This weekend we had the first Czech National Championship of 1/10 electric. The Championship consists of two races, one in each summer and winter. The champion had to be winner in both seasons.

click to enlarge
(click to enlarge)

This year it was club MK Svitavy that hosted the first outdoor national, and the club was really well prepared. The track was 100% AstroTurf. Again I met a new surface with the electric class.

Saturday we had qualification runs on schedule. I tried to learn this new surface by trying different tires, and I finally settled on Schumacher minipins since they were the most consistent on the track.
Afterwards I started rebuilding the set-up for carpet. The last time I drive the Euros it was a completely different surface. I made many changes until finally my car was really easy to drive.

I secured TQ and pole for the A main.

click to enlarge
(click to enlarge)

Sunday we had finals were on the schedule. In the morning I made a few adjustment on my car – such as shocks and ride height – and finally the car was dialed. I managed to win the first two mains to take victory home.

Everyone has been very happy with performance of the XB4. It was most used car during weekend.

click to enlarge
(click to enlarge)

Czech Nationals 2013 - 1/10 off-road 4WD - overall results:
1. Martin Bayer - XRAY XB4
2. JiřĂ­ Mára - XRAY XB4

3. Kája Novotný
4. David Kukla - XRAY XB4
5. Marcel Dostál - XRAY XB4


click to enlarge
(click to enlarge)

My winning set-up sheet: http://forum.teamxray.com/xform/index.php?act=view&ID=117&setup=xb4

In the 2WD class I have raced together with my teammate Jirka Mara with the XB2 prototype. For both of us it was the first race on AstroTurf with this prototype, so we had a lot of work to do right from the beginning. I used my set-up from the Euros, but of course had to change plenty of details to adapt to the new surface. As there was not enough time between the 4WD and 2WD runs we could not make any significant changes so we worked it out slowly with small changes all the time. Jirka had a great performance in the qualifiers and set the TQ.

click to enlarge
(click to enlarge)

In my qualifiers I had problems with the Astroturf getting into the drivetrain and blocking it, so I could not finish any better than 7th. In the main finals, Jirka won two finals without any pressure and got the Czech National champion 2WD with his XRAY XB2 prototype. Great job and congratulations! Despite my starting in 7th place I was still able to work my way up the pack and I finished on the podium in overall 3rd position.

click to enlarge
(click to enlarge)

Czech Nationals 2013 - 1/10 off-road 2WD - overall results:
1. JiřĂ­ Mara - XRAY XB2
2. Radek Flek
3. Martin Bayer - XRAY XB2


click to enlarge
(click to enlarge)

So it was a double win & double podium finish at the Czech Nationals in both 2WD and 4WD classes with the XB4, and the XB2 had a great result and achievement.

Thanks to everyone at Team XRAY for their very hard work & congratulations on the awesome results!


click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Photos from www.masters.cz