|
Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.
|
|
|
Ball Differential With Labyrinth Dust Covers™ - Set - 7075 T6
#305000
Complete ball-differential set uses new special Swiss 7075 T6 aluminum which is 30% stronger than previous material. Features heat-treated and hardcoated aluminum output shafts, screw for external adjustment, tough composite 34T diff pulley with Labyrinth Dust Covers™, high-performance ball-bearings, high-quality carbide axial thrustbearing, heavy-duty diff washers, and carbide diff balls. Factory pre-assembled.
|
|
|
Ball Differential - Spring Steel - Set
#305001
XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!
|
|
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
High-Performance Kevlar Drive Belt Rear 4x180mm
#305441
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance Kevlar reinforced drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
High-Performance Drive Belt Rear 3x180mm
#305442
Specially modified high-performance 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency. This belt is very thin and elastic as possible for an extremely effective transmission that saves batteries and eliminates friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
To fully enjoy the benefits from these high-performance belts, be sure all the transmission's ball-bearings are absolutely clean and there is no undue drag or friction.
|
|
|
Main Layshaft With Supporting Hardware
#305500
A complete central layshaft assembly. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel" with press-fit adapter. The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is precisely pressed directly onto the layshaft to give ultra-true spur gear rotation. The set includes also one-way pulley, fixed pulley and one-way adjustment nut.
|
|
|
Solid Alu Central Layshaft Set
#305502
Solid central layshaft set for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
|
|
Layshaft Spring Steel With Integrated Spur Gear Adapter
#305510
Central layshaft with press-fit adapter. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is accurately pressed directly onto the layshaft to give ultra-true spur gear rotation.
|
|
|
Layshaft Spring Steel Integr. Spur G. Adapter EVO2
#305511
Central layshaft with press-fit adapter. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is accurately pressed directly onto the layshaft to give ultra-true spur gear rotation.
|
|
|
Low Ratio Pulley Set (ratio 1.77)
#305550
New high-performance option set of low ratio pulleys. The set includes 32T front and rear differential pulleys and Labyrinth Dust Covers (TM), 32T pulley for front one-way, and 18T central layshaft pulleys.
|
|
|
Fixed Pulley 16T
#305570
Molded 16T pulley that is fixed to the central layshaft.
|
|
|
Fixed Pulley 18T (2)
#305571
Precision molded composite "low ratio" pulleys (18T) and side plate for use on solid central layshaft. Set of 2 pulleys and 1 side plate. The teeth number (18) is embossed into the side of each pulley for easy identification.
|
|
|
One-way Pulley 16T
#305580
Molded 16T pulley with one-way bearing rides on central layshaft.
|
|
|
One-Way Pulley With Grooved One-Way Bearing
#305582
New one-way bearing for the middle shaft. This bearing has grooves on its outer surface that will prevent any potential rotational slippage inside the nylon pulley.
|
|
|
High-Speed Ball-Bearing 5x9x3 Blue Covered (2)
#309035
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
|
High-Speed Ball-Bearing 6x10x3 Blue Covered (2)
#309045
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
|
HQ Ball-Bearing 10x15x4 Blue Covered (12)
#309053
High-performance high-quality ball-bearing
Top-quality professional ball-bearings for super free and super smooth drive train. These are the most quality ball-bearings with special polyamid blue covers and plastic cage for balls for maximum smooth operation, long life, highest tolerance and maximum performance. These ball-bearings have more balls inside the cage than the regular ones, that makes the ball-bearings higher performance. The covers are easy removable for quick and comfortable servicing. A must have item!
A complete set of 12 ball-bearings will substitute all 10x15x4 ball-bearings on your T1.
|
|
|
High-Speed Ball-Bearing 10x15x4 Blue Covered (2)
#309054
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
|
|
|
Ball-Bearing 10x15x4 Rubber Sealed - Oil (12)
#309055
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
302041 |
|
May 09, 2005 |
902310 |
|
Jul. 30, 2004 |
904306 |
|
Jul. 30, 2004 |
931015 |
|
Jul. 30, 2004 |
940509 |
|
Jul. 30, 2004 |
940610 |
|
Jul. 30, 2004 |
941015 |
|
Jul. 30, 2004 |
963060 |
|
Jul. 30, 2004 |
981210 |
|
Jul. 30, 2004 |
305571 |
|
Apr. 30, 2004 |
305550 |
|
Jun. 16, 2003 |
305442 |
|
May 15, 2003 |
305502 |
|
Nov. 27, 2002 |
309054 |
|
Jul. 24, 2002 |
309055 |
|
Jul. 24, 2002 |
305511 |
|
Jul. 04, 2002 |
305001 |
|
Jun. 24, 2002 |
309035 |
|
May 23, 2002 |
309045 |
|
May 23, 2002 |
309053 |
|
Dec. 10, 2001 |
| |
|
|