Front upper suspension inner arm made from tough molded composite. May be used on either left or right side. 

Front upper suspension arm inner ball joint made from tough molded composite. Set of 2. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 0 setting identified by no dot. Made from famous Hudy Spring Steel. Set of 2.  

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1° setting (identified by 1 dot) allows for either +1° or -1° caster adjustment depending on the orientation of the bushing. Made from famous Hudy Spring Steel™. Set of 2. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2° setting (identified by 2 dots) allows for either +2° or -2° caster adjustment depending on the orientation of the bushing. Made from Hudy Spring Steel™. Set of 2. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 

Set of composite bushings and ball mounts (2 + 2) for front lower suspension arm. The bushing is used to adjust the caster of the front caster block. The composite bushing has a 0° caster pre-setting. A complete set for one car. 

Pivoting ball mount for I.A.C. (Integrated Adjustable Caster). Works in conjunction with eccentric front bushings to create various caster settings in front suspension using the same C-hub block. Set of 2. 

Right-side C-hub block made from tough molded composite. Features multiple mounting positions for front upper arm.  

Left-side C-hub block made from tough molded composite. Features multiple mounting positions for front upper arm.  

Right-side steering block made from lightweight yet very strong and durable special composite. Features an inset steel bushing that is molded into the steering block. 

Right steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.  

Left-side steering block made from lightweight yet very strong and durable special composite. Features an inset steel bushing that is molded into the steering block. 

Left steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. 

Molded composite bushings for installing ball-bearings in alu steering blocks #352255 and #352265. Set of 4. 

Tough steel bushings for mounting steering blocks in C-hubs. One pair of long & short bushings used on each side. Complete set of 4. 

Set of four steel steering bushings for composite C-hub suspension. Includes 2 short and 2 long bushings. These longer bushings must be used when CVD driveshafts are used in the front. 

Eccentric bushings for adjusting suspension settings. Set of 2. 

Front upper suspension holder for REAR of front bulkhead. 

Front upper suspension holder for REAR of front bulkhead. CNC-machined from highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging.  

Rear lower suspension holder for REAR of rear bulkhead of XB8-TQ. Allows for rear toe-in angles 2-4°. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

Molded clips for adjusting position of front upper arm. Includes 1mm, 2mm, and 3mm thick clips. Set of 2. 

Adjustable M5 turnbuckle made from famous Hudy Spring Steel™. 35mm length. Set of 2. 

Pivot ball 6.8mm diameter. Set of 4. 

Universal drive shaft set made from famous HUDY Spring Steel™ connect the front or rear differential to the wheels. (Not exchangeable with drive shafts between the center differential and the front/rear differentials.) 

CVD drive shaft set made from world-renown HUDY Spring Steel™ connects the front or rear differential to the wheels. (Not exchangeable with drive shafts between the center differential and the front/rear differentials.) The CVD drive shaft is rebuildable and all parts are available separately as spare parts. 

CVD drive axle made from world-renown Hudy Spring Steel™. Strategically machined for toughness and light weight without compromising strength. 

CVD drive shaft coupling made from tough Hudy steel. Specially hand-ground for maximum precision. Fits all CVD drive shafts. 

Hardcoated aluminum wheel axle. Set of 2. 

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 

CVD universal drive shaft made from world-renown HUDY Spring Steel™. Ultra lightweight, strategically weight-reduced without compromising strength, manufactured from the premium high-quality top-secret Hudy Spring Steel™. 

Front upper pivot pins. Hardened steel, 4mm thick. Set of 2. 

Front upper pivot pins only for #352301 Euros'05 TQ Front Suspension - Set. Hardened steel, 4mm thick. Set of 2. 

Front lower outer pivot pins. Hardened steel, 4mm thick. Set of 2. 

Complete set of rubber-covered ball bearings for XB8. Set of 24. 

M4x4 setscrew, hex drive. Set of 10 pieces. 

M5x4 setscrew, hex drive. Set of 10 pieces. 

M3x5 button-head machine screw, hex drive. Set of 10 pieces. 

M3x22 button-head machine screw, hex drive. Set of 10 pieces. 

Hex screw M4x12. Set of 10 pieces.
 

Hex screw M4x16. Set of 10 pieces.
 

M3x12 flat-head machine screw, hex drive. Set of 10 pieces.

 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 

M3 nylock nut. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 3mm x 17mm. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2.5mm x 16mm. Set of 10 pieces.