|
Alu Nut (2)
#302032
CNC-machined alu nut that holds front lower molded lower suspension holders. Set of two.
|
|
|
Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.
|
|
|
Eccentric Nylon Hub For Bulkhead + Covers (4+2)
#302070
Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
High-Performance Drive Belt Rear 3x180mm
#305442
Specially modified high-performance 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency. This belt is very thin and elastic as possible for an extremely effective transmission that saves batteries and eliminates friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
To fully enjoy the benefits from these high-performance belts, be sure all the transmission's ball-bearings are absolutely clean and there is no undue drag or friction.
|
|
|
Alu Solid Layshaft T1FK 05 (Set)
#305503
Central layshaft set for XRAY T1FKâ™05 includes CNC-machined hollow, ultra lightweight alu layshaft, precision-molded 20T pulleys, and all mounting hardware.
|
|
|
Offset Spur Gear 78T/48
#305778
XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 81T/48
#305781
XRAY precision molded offset spur gear 81 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Spur Gear 84T/48
#305784
XRAY precision molded spur gear 84 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Spur Gear 87T/48
#305787
XRAY precision molded spur gear 87 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Spur Gear 90T/48
#305790
XRAY precision molded spur gear 90 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 104T/64
#305874
XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 106T/64
#305876
XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 108T/64
#305878
XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 110T/64
#305880
XRAY precision molded offset spur gear 110 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 112T/64
#305882
XRAY precision molded offset spur gear 112 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 114T/64
#305884
XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 116T/64
#305886
XRAY precision molded offset spur gear 116 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 118T/64
#305888
XRAY precision molded offset spur gear 118 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Universal Set Of Plastic Shims
#309319
Set of shims for setting static wheelbase. Fits over rear lower pivot pins, servo saver, front one-way diff and other shims.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
901408 |
|
Jul. 30, 2004 |
902305 |
|
Jul. 30, 2004 |
902310 |
|
Jul. 30, 2004 |
902312 |
|
Jul. 30, 2004 |
904306 |
|
Jul. 30, 2004 |
940509 |
|
Jul. 30, 2004 |
940610 |
|
Jul. 30, 2004 |
941015 |
|
Jul. 30, 2004 |
965050 |
|
Jul. 30, 2004 |
981210 |
|
Jul. 30, 2004 |
303159 |
|
Feb. 12, 2004 |
305442 |
|
May 15, 2003 |
309319 |
|
Mar. 24, 2003 |
302070 |
|
Jul. 04, 2002 |
305431 |
|
Oct. 21, 2001 |
302032 |
|
May 18, 2001 |
302040 |
|
May 18, 2001 |
302080 |
|
May 18, 2001 |
305787 |
|
May 18, 2001 |
305790 |
|
May 18, 2001 |
| |
|
|