Dimensions |
Class: |
1/10 electric touring car |
Width: |
189 mm |
Length: |
372 mm |
Wheelbase: |
adjustable 257 - 261 mm |
Weight: |
560 g |
Ready-to-run weight: |
1380 g |
Chassis: |
Chassis: |
machined 2.5 mm laminated carbon graphite |
Upper deck: |
machined 2.5 mm laminated carbon graphite |
Shock towers: |
machined 2.5 mm laminated carbon graphite (front + rear) with multiple shock mounting and camber link roll center positions |
Body: |
not included, uses 190 mm type |
Drive Train: |
Type: |
dual belt |
Main layshaft: |
alu solid main layshaft |
Primary: |
pinion/spur |
Drive ratio: |
1.7 |
Drive shafts: |
lightweight constant-velocity driveshafts with lightweight integrated hex hubs |
Front axle: |
XRAY Multi-Diff (one-way/one-way solid/full-time solid axle); Ball Differential (US kits only) |
Rear differential |
lightweight sealed ball differential with carbide balls and axial thrustbearing |
Belts: |
ultra-thin belts |
Bearings: |
rubber covered high-speed bearings |
Suspension: |
Front: |
short lower wishbone C-hub / camber link |
Rear: |
short lower wishbone C-hub / camber link |
C-blocks: |
3° caster blocks |
Shocks: |
XRAY 4-step externally adjustable, oil-filled, coil-over shocks |
Geometry: |
Camber: |
adjustable front + rear |
Caster: |
3° static (optional 0°, 1.5°, 4.5° or 6°) |
Toe-in: |
adjustable front + rear |
Downstops: |
adjustable front + rear |
Front anti-dive: |
adjustable 0° or 3° |
Rear anti-squat: |
adjustable 0° or 3° |
Anti-roll bars: |
optional front + rear |
Ackermann: |
adjustable, two positions on both steering blocks |
Steering: |
ball-bearing supported center-point steering with built-in servo saver |
Other: |
Wheels: |
HUDY 24 mm wheels |
Tires: |
non included |
Instructions: |
full-color manual with 3D graphics |
Set-up book: |
HUDY Set-up Book (over 56 pages and more than 140 photos) |
Packaging: |
carton box with vinyl bags with parts, preassembled chassis |
Additionally included: |
Authentication Certificate, set-up sheet, parts list, option parts list, decals |
Not included: |
radio system (transmitter and receiver), steering servo, motor, pinion gear, battery pack (6 cell), speed controller, charger, 1/10-scale bodyshell (190 mm), tires, inserts, high-strength fibre tape, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock |