|
Roll Center Alu Holder - Set (2)
#303031
This set is used to relocate the inner mounting points for the rear camber links. Used with #303093 rear shocktower to utilize shorter camber links with short arm suspension, and also allows changes to rear roll center. Set includes alu pivot ball posts and mounting hardware.
|
|
|
Shock Tower Rear - Factory Kit
#303093
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Optimized positioning holes for upper shock mounting as well as upper camber link mounting.
|
|
|
Alu Upright Rear For C-Hub Suspension
#303355
CNC-machined rear upright for C-hub suspension is made from highest-quality duraluminum. Can be used on either left or right side. Includes two nylon bushings for ball-bearings.
|
|
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303356
CNC-machined rear upright made from highest-quality duraluminum features an integrated 1° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings.
|
|
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303357
CNC-machined rear upright made from highest-quality duraluminum features an integrated 2° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings.
|
|
|
Anti-Roll Bar Rear 2mm (Set)
#303400
If your car is understeering, then try this optional rear anti-roll bar. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction. This will give your car more steering.
|
|
|
Anti-Roll Bar Rear 2mm
#303420
Rear anti-roll bar (2.0mm thick) is included in the optional Rear Anti-Roll Bar Set, part number 302400. This is the STIFFEST rear anti-roll bar.
|
|
|
Anti-roll Bar Rear 1mm
#303421
Optional rear anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment possibilities of the rear anti-roll bar. This is the SOFTEST rear anti-roll bar.
|
|
|
Anti-roll Bar Rear 1.5mm
#303422
Optional rear anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the rear anti-roll bar. This is the MEDIUM rear anti-roll bar.
|
|
|
Short Nylon Ball Joint 4.9mm (4+2)
#303450
Molded short 5mm ball joints, for connection to 5mm ball ends. Set of four ball joints and connectors. Used for the rear anti-roll bar mounting.
|
|
|
Drive Shaft Replacement Plastic Cap 3mm (4) - V2
#305240
Low friction drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of four.
V2 Update: Both the material and design have been improved to reduce wear of the differential outdrives.
|
|
|
Wheel Axle-22mm-Integr. Hex Hub - (Factory Kit) (2)
#305311
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
|
|
|
Wheel Axle â“ 22mm - Offset âś-1mmâť - Hard Coated (2)
#305312
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.
|
|
|
Wheel Axle â“ 22mm - Offset âś+1mmâť - Hard Coated (2)
#305313
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.
|
|
|
Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315
Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.
|
|
|
Drive Shaft-51mm-Spring Steel - (Factory Kit) (2)
#305321
Rear drive shafts, CNC-machined from world-renowned top-secret "Hudy Spring Steel". These race quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
303356 |
|
May 09, 2005 |
303357 |
|
May 09, 2005 |
305312 |
|
May 09, 2005 |
305313 |
|
May 09, 2005 |
901305 |
|
Jul. 30, 2004 |
902306 |
|
Jul. 30, 2004 |
902308 |
|
Jul. 30, 2004 |
902310 |
|
Jul. 30, 2004 |
941015 |
|
Jul. 30, 2004 |
967100 |
|
Jul. 30, 2004 |
981210 |
|
Jul. 30, 2004 |
303031 |
|
Jul. 23, 2004 |
302615 |
|
Mar. 26, 2004 |
303093 |
|
Mar. 26, 2004 |
305311 |
|
Mar. 26, 2004 |
305321 |
|
Mar. 26, 2004 |
302662 |
|
Mar. 24, 2003 |
303350 |
|
Mar. 24, 2003 |
307454 |
|
Mar. 24, 2003 |
303355 |
|
Sep. 22, 2002 |
| |
|
|