Strong composite rear body post with elongated design to minimize the body breakage around the body post openings.  

Adjustable M5 turnbuckle made from a special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles.  

Molded composite rear brace holder, can be mounted either on left or right side. 

Inner ball joint for rear upper camber link. Set of 2. 

Molded composite rear upper camber link ball joints fit on the outside end of the camber link turnbuckle of the XT8. Set of 2. 

Mounting pivot ball with shoulder 6.8mm dia. Set of 4. 

Pivot ball 6.8mm diameter. Set of 4. 

All-new 1-piece rear upright has a new geometry, generating more traction and helping to absorb bumps on rough parts of the track.  

Set of molded composite shims for rear hub carrier adjustment. Set includes: 3.2x9x1mm shims (2x) and 3.2x9x2mm shims (2x). 

Rear wing posts made of tough composite material. Complete set of 4 pieces. 

Rear wing mounting braces made from tough molded composite material. Set of self-tapping screws included. 

All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering angle is applied.

 

Hardcoated aluminum wheel axle. Set of 2. 

Hardened 3mm rear lower outer hinge pins are mounted through the rear uprights and locked with self-locking nuts. This concept ensures that suspension pins will never come out during racing and moreover it ensures that the play between the arms and uprights will not change. The upright holder concept reinforces the holding of the upright and prevents the pin or upright from becoming disconnected in crashes. 

M5x4 setscrew, hex drive. Set of 10 pieces. 

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 

M3x14 button-head machine screw, hex drive. Set of 10 pieces. 

M3x18 button-head machine screw, hex drive. Set of 10 pieces. 

M3x20 button-head machine screw, hex drive. Set of 10 pieces. 

M3x30 button-head machine screw, hex drive. Set of 10 pieces. 

M3x12 flat-head machine screw, hex drive. Set of 10 pieces.

 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 

M3 nylock nut. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 3mm x 17mm. Set of 10 pieces.