|
Receiver Switch - Set
#336060
Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors.
|
|
|
Composite 2-Speed Gear 48T (1st)
#345548
XRAY precision-molded 48T spur gear (1st gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass.
|
|
|
Composite 2-Speed Gear 50T (1st)
#345550
XRAY precision-molded 50T spur gear (1st gear, module 1) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass.
|
|
|
XRAY XB8/GTX C-Hub Front Suspension Conversion Set
#350907
Complete C-hub conversion set for GTX platform fits both nitro and electric powered GTX. The C-hub suspension is suited for most standard track conditions and makes the car more responsive and increases steering resulting into faster lap times.
|
|
|
XB8 Chassis Side Guards L+R
#351159
All-new redesigned side guards incorporate a larger bottom radius to make the car more stable on rough tracks, and increase the car???s longitudinal flex.
|
|
|
Composite Chassis Side Guard L+R - Soft
#351159-S
The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
|
|
|
XB8 Graphite Upper Plate
#351348
Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.
|
|
|
XB8 Composite Front Lower Suspension Arm
#352117
Front lower suspension arm for XB8 made from super-tough, high-tech composite material. Universal design allows the arm to be used on either left or right sides.
|
|
|
Composite C-Hub 16 Right
#352277
Molded composite C-hub for RIGHT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching left-side C-hub #352287.
|
|
|
Composite C-Hub 16 Left
#352287
Molded composite C-hub for LEFT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching right-side C-hub #352277.
|
|
|
XB9 Composite Rear Lower Suspension Arm
#353115
Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides.
|
|
|
Alu Rear Wing Shim (2)
#353561
Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2.
|
|
|
Composite Rear Wing Shim - Black (2)
#353565
Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2.
|
|
|
Center Diff Lower Plates (2)
#354032
Precision-cut shimming plates for raising the center diff mount when using 48T center spur gear (#355048).
|
|
|
Differential Case - V2 - Graphite
#355022-G
Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place.
|
|
|
Active Differential Spur Gear 46T
#355146
The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
|
|
|
Alu Wheel Axle Offset +1mm - Hard Coated
#355251
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.
|
|
|
Alu Wheel Axle Offset +2mm - Hard Coated
#355252
Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear.
|
|
|
Wheel Nut With Cover - Hard Coated (2)
#355265
Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.
|
|
|
Steel Pinion Gear 12T
#355712
High-performance 12T pinion gear, manufactured from special steel for toughness and durability.
|
|
|
Steel Pinion Gear 13T
#355713
High-performance 13 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw.
|
|
|
Steel Pinion Gear 14T
#355714
High-performance 14 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw.
|
|
|
Steel Pinion Gear 15T
#355715
High-performance 15 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw.
|
|
|
Steel Pinion Gear 16T
#355716
High-performance 16 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw.
|
|
|
Steel Pinion Gear 17T
#355717
High-performance 17 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw.
|
|
|
Alu Pinion Gear - Hard Coated 19T
#355819
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Alu Pinion Gear - Hard Coated 20T
#355820
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Alu Pinion Gear - Hard Coated 21T
#355821
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Alu Pinion Gear - Hard Coated 22T
#355822
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Alu Pinion Gear - Hard Coated 23T
#355823
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Alu Pinion Gear - Hard Coated 24T
#355824
High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.
|
|
|
Brass Adjusting Nut M15x1 (2)
#357253
Optional brass M15 adjusting nut for capturing pivot balls in front steering blocks. The additional weight nuts are more than 3x heavier than standard alu adjusting nut. Great and handy for weight balance adjustment. Set of 2. Fits XB8.
|
|
|
XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054
CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.
|
|
|
Shock Rubber Membrane (4)
#358082
Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.
|
|
|
Shock Rubber Membrane Ribbed (4)
#358083
Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4.
|
|
|
XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084
Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8.
|
|
|
Shock Foam Insert (4)
#358090
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.
|
|
|
GT Body with Wing for 1/8 On-Road GT
#359730
XRAYâ™s self-designed GTX8 body â“ made from high-quality Lexan™ material â“ features high-downforce areas: front windscreen for proper airflow, and side downforce areas for higher stability.
|
|
|
Connecting Cable Receiver/Batt. Pack
#389135
Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end.
|
|
ID |
Product Name |
Released |
350907 |
|
Jan. 23, 2020 |
352121-S |
|
Jun. 27, 2019 |
352121-G |
|
May 07, 2019 |
352121 |
|
Apr. 26, 2019 |
353354-G |
|
Apr. 24, 2019 |
355086 |
|
Mar. 25, 2019 |
358087-M |
|
Feb. 21, 2019 |
352120-G |
|
Jan. 16, 2019 |
352121-H |
|
Dec. 06, 2018 |
352245 |
|
Dec. 06, 2018 |
352277 |
|
Dec. 06, 2018 |
352287 |
|
Dec. 06, 2018 |
355215 |
|
Dec. 06, 2018 |
358085 |
|
Nov. 12, 2018 |
358027 |
|
Jul. 12, 2018 |
358028 |
|
Jul. 12, 2018 |
358029 |
|
Jul. 12, 2018 |
358030 |
|
Jul. 12, 2018 |
358031 |
|
Jul. 12, 2018 |
355819 |
|
Mar. 20, 2018 |
| |
|
|